SCHAEFFER GREASES ?>

SCHAEFFER GREASES

Schaeffer Moly EP greases are versatile, multi-purpose extreme pressure aluminum complex base greases that are specially formulated for use in all types of heavy-duty automotive, construction, mining, farming and industrial equipment. Applications exposed to the most adverse conditions, excessive pressure, high shock loading, extreme hot and cold temperatures, extreme contamination and high moisture will benefit from Schaeffer grease formulations.

Incorporated into Schaeffer’s blend of synthetic base oils and high viscosity index paraffin base stocks is and aluminum complex thickener designed to resist bleeding and deliver excellent performance in high moisture and extreme temperatures. Further incorporated into the base are two proven friction modifiers: molybdenum disulfide and Penetro®. These friction reducing additives protect the metal surface and provide outstanding resistance to wear. These additives act as “back-stop” lubricants when conditions and loads become severe. Molybdenum disulfide plates to the metal surface to form a long lasting solid lubricant film. This solid lubricant film will withstand pressures up to 500,000 pounds per square inch, giving the metal surfaces of the bearings the protection they need during periods of high speed, start-up, high shock loads and extreme pressure.

Schaeffer EP greases exhibit excellent resistance to washout, pound out, splatter or squeeze out even under the heaviest load or vibrations. The excellent adhesive properties of Schaeffer greases allow greasing intervals to be extended, reducing lubrication and labor cost.

SCHAEFFER GREASE PRODUCT LINE

197 MOLY PURE SYNTHETIC GREASE
NLGI #2
EXTREME PRESSURE GREASE
LOW TEMPERATURE, PUMPABLE TO -50°F
BENTONE BASE
HIGH HEAT / NON-MELT
420 LB
120 LB
40 LB
30 TUBE/CS
206 HI TEMP COTTON PICKER GREASE
WEIGHTS: #00 – #0
EXTREME PRESSURE
BENTONE BASE.
WATER RESISTANT. NON-MELT / NON-STAINING
420 LB
120 LB
40 LB
221 MOLY ULTRA
NLGI #1, #2
EXTREME PRESSURE GREASE
CONTAINS EXTRA MOS2
ALUMINUM COMPLEX BASE
WATERPROOF/HI-HEAT, GOOD UP TO 350°F
420 LB
120 LB
40 LB
30 TUBE/CS
228 #2 SUPER HV RED
NLGI#2 ONLY
ISO 460 BASE OIL
PARA-SYNTHETIC, EXTREME PRESSURE GREASE
ALUMINUM COMPLEX BASE,
EXTRA TACKY, CONTAINS SYNTHESIZED MOLY. RED COLOR
FOR USE WHERE A CLEAN (NOT BLACK) GREASE IS NEEDED.
WATERPROOF / HI-HEAT GOOD UP TO 350°F
RECOMMENDED FOR HEAVILY LOADED SLOW MOVING BEARINGS.
420 LB
120 LB
40 LB
229 ULTRA RED SUPREME
NLGI #1 AND #2
PARA-SYNTHETIC, EXTREME PRESSURE GREASE
ALUMINUM COMPLEX BASE,
EXTRA TACKY, CONTAINS SYNTHESIZED MOLY. RED COLOR
FOR USE WHERE A CLEAN (NOT BLACK) GREASE IS NEEDED.
WATERPROOF / HI-HEAT GOOD UP TO 350°FPULSAR M AUTO LUBER AVAILABLE ONLY IN #2
PULSAR SERVICE PACK 4 PER CASE
420 LB
120 LB
40 LB
30 TUBE/CS
229PGL PIVOT GEAR LUBE
PARA-SYNTHETIC, E.P. THIXOTROPIC SEMI-FLUID GREASE FOR
LUBRICATION OF CENTER PIVOT IRRIGATION GEAR BOXES.
ALUMINUM COMPLEX, CONTAINS SYNTHESIZED MOLY, WATER PROOF
420 LB
120 LB
40 LB
238 ULTRA SUPREME
NLGI #1, #2 AND #3
PARA-SYNTHETIC, EXTREME PRESSURE GREASE
CONTAINS EXTRA MOS2 / OTHER SOLIDS
ALUMINUM COMPLEX BASE
MEETS CAT’S 5% MOLY GREASE SPEC.
EXTRA TACKY / WATERPROOF / HI-HEAT
GOOD UP TO 350°F
420 LB
120 LB
40 LB
30 TUBE/CS
248 MOLY SYNGARD 2000
NLGI #1, #2 AND #3
EXTREME PRESSURE GREASE
TACKY, CONTAINS SYNTHESIZED MOLY
BENTONE BASE / NON-MELT
(AVAILABLE WITH LINER)
420 LB
120 LB
40 LB
30 TUBE/CS
260 PERMA MOLY
NLGI #1, #2 AND #3
EXTREME PRESSURE GREASE
NON-MELT / WATER RESISTANT / EXTRA MOS2
BENTONE BASE, CONTAINS SYNTHESIZED MOLY
ISO 460 BASE OIL (NLGI#2 ONLY)
420 LB
120 LB
40 LB
30 TUBE/CS
274 MOLY E.P. SYNTHETIC PLUS GREASE
NLGI #00, #0, #1 AND #2
PARA-SYNTHETIC, EXTREME PRESSURE GREASE
ALUMINUM COMPLEX BASE, WATER PROOF
LOW TEMPERATURE / PUMPABLE TO -35°F
GOOD UP TO 350°FPULSAR M AUTO LUBER AVAILABLE ONLY IN #2
PULSAR SERVICE PACK 4 PER CASE
420 LB
120 LB
40 LB
30 TUBE/CS
274M2 MOLY E.P. SYNTHETIC PLUS GREASE
SAME AS 0274
PLUS 5% MOLY.
ONLY AVAILABLE IN NLGI #2
(AVAILABLE WITH LINER)
420 LB
120 LB
40 LB
278 POLY UREA GREASE
NLGI#2
EXTREME PRESSURE, POLY UREA BASE
WATER RESISTANT
RECOMMENDED FOR ELECTRIC MOTORS.
400 LB
120 LB
40 LB
30 TUBE/CS
286 HI TEMP GREASE 475 LB
140 LB
45 LB
286C HI TEMP GREASE W/COPPER
CONTAINS MOLY, GRAPHITE AND COPPER
FOR BEARING APPLICATIONS UP TO 1200°F.
475 LB
140 LB
45 LB